Viewing Dynamic Addresses; Dynamic Address Table - Dell PowerConnect 5324 User Manual

Viewing Dynamic Addresses

The Dynamic Address Table contains fields for querying information in the dynamic address table,
including the interface type, MAC addresses, VLAN, and table sorting. Packets forwarded to an
address stored in the address table are forwarded directly to those ports. The Dynamic Address
Table also contains information about the aging time before a dynamic MAC address is erased, and
includes parameters for querying and viewing the Dynamic Address list. The Current Address Table
contains dynamic address parameters by which packets are directly forwarded to the ports.
To open the Dynamic Address Table, click Switch Address Table Dynamic Addresses Table in
the tree view.
Figure 7-96. Dynamic Address Table
Address Aging (10-360) — Specifies the amount of time the MAC Address remains in the
Dynamic Address Table before it is timed out if no traffic from the source is detected. The default
value is 300 seconds.
Interface — Specifies the interface for which the table is queried. There are two interface types
from which to select.
Port — Specifies the port numbers for which the table is queried.
LAG — Specifies the LAG for which the table is queried.
234
Configuring Device Information