Displaying Switch Hardware/Software Versions - SMC Networks 6152L2 - annexe 1 Management Manual

CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5
Console(config)#snmp-server location WC 9
Console(config)#snmp-server contact Geoff
Console(config)#exit
Console#show system
System Description: SMC Networks SMC6152L2
System OID String: 1.3.6.1.4.1.202.20.66
System Information
System Up Time:
seconds
System Name:
System Location:
System Contact:
MAC Address (Unit1):
Web Server:
Web Server Port:
Web Secure Server:
Web Secure Server Port:
Telnet Server:
Telnet Server Port:
Jumbo Frame:
POST Result:
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
Console#

Displaying Switch Hardware/Software Versions

Use the Switch Information page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
Field Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in RJ-45 ports and expansion
ports.
• Hardware Version – Hardware version of the main board.
0 days, 0 hours, 7 minutes, and 22.65
R&D
WC 9
Geoff
00-00-12-32-23-21
Enabled
80
Enabled
443
Enable
23
Disabled
B C
ASIC ONFIGURATION
4-34
4-129
4-128
4-80
3-15