Show Map Ip Dscp - SMC Networks 6152L2 - annexe 1 Management Manual

Example
The following example shows how to map IP DSCP value 1 to CoS
value 0.
Console(config)#interface ethernet 1/5
Console(config-if)#map ip dscp 1 cos 0
Console(config-if)#

show map ip dscp

This command shows the IP DSCP priority map.
Syntax
show map ip dscp [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Always unit 1)
- port - Port number. (Range: 1-30)
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
P C
RIORITY OMMANDS
4-231