System Status Commands; Show Startup-Config; Table 4-8 System Status Commands - SMC Networks 8126PL2-F - annexe 1 Management Manual

Example
Console(config)#hostname RD#1
Console(config)#

System Status Commands

This section describes commands used to display system information.
Command

show startup-config

show running-config
show system
show users
show version
show startup-config
This command displays the configuration file stored in non-volatile memory that is
used to start up the system.
Command Mode
Privileged Exec
Command Usage
• Use this command in conjunction with the show running-config command to
compare the information in running memory to the information stored in
non-volatile memory.
• This command displays settings for key command modes. Each mode group
is separated by "!" symbols, and includes the configuration mode command,
and corresponding commands. This command displays the following
information:
- Switch's MAC address
- SNTP server settings
- Local time zone
- SNMP community strings
- Users (names and access levels)
- VLAN database (VLAN ID, name and state)
- VLAN configuration settings for each interface
- Multiple spanning tree instances (name and interfaces)
- Interface settings
- IP address configured for the switch
- Any configured settings for the console port and Telnet

Table 4-8 System Status Commands

Function
Displays the contents of the configuration file (stored in flash
memory) that is used to start up the system
Displays the configuration data currently in use
Displays system information
Shows all active console, SSH, Telnet and web sessions,
including user name, idle time, and IP address of network clients
Displays version information for the system
System Management Commands
4
Mode Page
PE 4-17
PE 4-18
NE, PE 4-21
NE, PE 4-21
NE, PE 4-22
4-17