Chapter 25: User Authentication Commands; User Account Commands; Table 25-1 Authentication Commands; Table 25-2 User Access Commands - SMC Networks TigerStack II SMC8926EM Management Manual

Chapter 25: User Authentication Commands

You can configure this switch to authenticate users logging into the system for
management access using local or remote authentication methods. You can also
enable port-based authentication for network client access using IEEE 802.1X.
Command Group
User Accounts
Authentication Sequence
RADIUS Client
TACACS+ Client
Web Server Settings
Telnet Server Settings
Secure Shell Settings
Port Security
Port Authentication
Management IP Filter

User Account Commands

The basic commands required for management access are listed in this section.
This switch also includes other options for password checking via the console or a
Telnet connection (page 23-17), user authentication via a remote authentication
server (page 25-1), and host access authentication for specific ports (page 25-26).
Command
username
enable password

Table 25-1 Authentication Commands

Function
Configures the basic user names and passwords for management
access
Defines logon authentication method and precedence
Configures settings for authentication via a RADIUS server
Configures settings for authentication via a TACACS+ server
Enables management access via a web browser
Enables management access via Telnet
Provides secure replacement for Telnet
Configures secure addresses for a port
Configures host authentication on specific ports using 802.1X
Configures IP addresses that are allowed management access

Table 25-2 User Access Commands

Function
Establishes a user name-based authentication system at login
Sets a password to control access to the Privileged Exec level
Page
25-1
25-4
25-6
25-9
25-11
25-14
25-15
25-24
25-26
25-35
Mode Page
GC 25-2
GC 25-3
25-1