System Management Commands; Device Designation Commands; Hostname; Table 4-6 System Management Commands - SMC Networks 6152PL2 Management Manual

4
Command Line Interface

System Management Commands

These commands are used to control system logs, passwords, user names, browser
configuration options, and display or configure a variety of other system information.
Command Group
Device Designation
Banner Information
System Status
Frame Size
File Management
Line
Event Logging
SMTP Alerts
Time (System Clock)
Switch Clustering
UPnP

Device Designation Commands

Command
prompt

hostname

snmp-server contact
snmp-server location
hostname
This command specifies or modifies the host name for this device. Use the no form
to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
4-18

Table 4-6 System Management Commands

Function
Configures information that uniquely identifies this switch
Configures administrative contact, device identification and location
Displays system configuration, active managers, and version information
Enables support for jumbo frames
Manages code image or switch configuration files
Sets communication parameters for the serial port, including baud rate and
console time-out
Controls logging of error messages
Configures SMTP email alerts
Sets the system clock automatically via NTP/SNTP server or manually
Configures management of multiple devices via a single IP address
Sets Universal Plug-and-Play parameters used to advertise the switch

Table 4-7 Device Designation Commands

Function
Customizes the prompt used in PE and NE mode
Specifies the host name for the switch
Sets the system contact string
Sets the system location string
Page
4-18
4-19
4-29
4-35
4-36
4-44
4-57
4-63
4-67
4-81
4-85
Mode Page
GC 4-16
GC 4-18
GC 4-91
GC 4-92