Table of Contents
Advertisement
CLI – This example specifies a remote SNMPv3 engine ID.
Console(config)#snmp-server engine-id remote
192.168.1.19 12345abcdef
Console(config)#exit
Console#show snmp engine-id
Local SNMP EngineID: 12345abcdef000000000000000
Local SNMP EngineBoots: 1
Remote SNMP engineID
12345abcdef0
Console#
Configuring SNMPv3 Users
Each SNMPv3 user is defined by a unique name. Users must be configured
with a specific security level and assigned to a group. The SNMPv3 group
restricts users to a specific read, write, or notify view.
Command Attributes
•
User Name – The name of user connecting to the SNMP agent.
(Range: 1-32 characters)
•
Group Name – The name of the SNMP group to which the user is
assigned. (Range: 1-32 characters)
•
Security Model – The user security model; SNMP v1, v2c or v3.
•
Security Level – The security level used for the user:
- noAuthNoPriv – There is no authentication or encryption used in
SNMP communications. (This is the default for SNMPv3.)
- AuthNoPriv – SNMP communications use authentication, but the
data is not encrypted (only available for the SNMPv3 security model).
- AuthPriv – SNMP communications use both authentication and
encryption (only available for the SNMPv3 security model).
•
Authentication Protocol – The method used for user authentication.
(Options: MD5, SHA; Default: MD5)
•
Authentication Password – A minimum of eight plain text characters
is required.
•
Privacy Protocol – The encryption algorithm use for data privacy;
only 56-bit DES is currently available.
S
N
IMPLE
ETWORK
M
ANAGEMENT
IP address
192.168.1.19
P
ROTOCOL
4-159
4-160
3-61
Advertisement
Table of Contents
