Lacp Linkagg Actor System Id - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Link Aggregation Commands

lacp linkagg actor system id

Configures the MAC address of a dynamic aggregate group on the switch.
lacp linkagg agg_num actor system id actor_system_id
lacp linkagg agg_num no actor system id
Syntax Definitions
agg_num
actor_system_id
Defaults
parameter
actor_system_id
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Use the no form of this command to remove an actor system ID from a dynamic aggregate group.
Examples
-> lacp linkagg 3 actor system id 00:20:da:81:d5:b0
-> lacp linkagg 3 no actor system id
Release History
Release 6.1; command was introduced.
Related Commands
lacp linkagg size
show linkagg
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggActorSystemID
OmniSwitch CLI Reference Guide
The number corresponding to the dynamic aggregate group.
The MAC address of the dynamic aggregate group on the switch in the
hexadecimal format xx:xx:xx:xx:xx:xx.
default
0
Creates a dynamic aggregate group.
Displays information about static and dynamic (LACP) aggregate
groups.
June 2012 page 8-17