Mvrp Timer Join - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

MVRP Commands

mvrp timer join

Specifies the join time interval between transmit opportunities for the dynamically registering VLANs on
the switch.
mvrp {port slot/port [– port2] | linkagg agg_num [-agg_num2]} timer join timer-value
Syntax Definitions
slot/port
agg_num
timer-value
Defaults
parameter
timer-value
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use default timer settings unless there is a compelling reason to change the settings. Modifying timers
to inappropriate values might cause an imbalance in the operation of MVRP.
•
To use the agg_num parameter, the link aggregate group must be created and enabled.
Examples
-> mvrp port 1/2 timer join 600
-> mvrp port 1/2-12 timer join 600
-> mvrp linkagg 3 timer join 600
-> mvrp linkagg 3-6 timer join 600
Release History
Release 6.4.3; command was introduced.
OmniSwitch CLI Reference Guide
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The number corresponding to the aggregate group.
Specifies the value of the join timer in milliseconds.The valid range is
250 milliseconds to 1073741773 milliseconds.
default
600 milliseconds
June 2012 page 11-15