Static Linkagg Name - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Link Aggregation Commands

static linkagg name

Configures a name for an existing static aggregate group.
static linkagg agg_num name name
static linkagg agg_num no name
Syntax Definitions
agg_num
name
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850,6850E, 6855, 9000E
Usage Guidelines
Use the no form of this command to remove a name from a static aggregate.
Examples
-> static linkagg 2 name accounting
-> static linkagg 2 no name
Release History
Release 6.1; command was introduced.
Related Commands
static linkagg size
show linkagg
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggName
OmniSwitch CLI Reference Guide
The number corresponding to the static aggregate group.
The name of the static aggregation group, an alphanumeric string up to
255 characters. Spaces must be contained within quotes (e.g., "Static
Group 1").
Creates a static aggregate group.
Displays information about static and dynamic (LACP) aggregate
groups.
June 2012 page 8-5