Lldp Transmit Hold-Multiplier - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

lldp transmit hold-multiplier

Sets the transmit hold multiplier value. This value is used to calculate the Time To Live (TTL) value that
is advertised in an LLDPDU.
lldp transmit hold-multiplier num
Syntax Definitions
num
Defaults
parameter
num
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
This command applies only to LLDP-enabled ports.
•
LLDP multiples the transmit hold multiplier by the transmit interval value to determine the TTL value
that is advertised in an LLDPDU.
Examples
-> lldp transmit hold-multiplier 6
Release History
Release 6.3.1; command introduced.
Related Commands
lldp transmit interval
show lldp local-system
MIB Objects
lldpConfiguration
lldpMessageTxHoldMultiplier
page 12-6
The transmit hold multiplier value. The valid range is 2–10.
default
4
Sets the transmit time interval for LLDPDUs. This is the amount of
time the switch waits between each transmission of an LLDPDU.
Displays local system information.
802.1AB Commands
OmniSwitch CLI Reference Guide June 2012