lacp linkagg actor system priority
Configures the priority of the dynamic aggregate group.
lacp linkagg agg_num actor system priority actor_system_priority
lacp linkagg agg_num no actor system priority
Syntax Definitions
agg_num
actor_system_priority
Defaults
parameter
actor_system_priority
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use the no form of this command to return the value to its default.
•
Ports with the same system priority value can join the same dynamic aggregate group.
Examples
-> lacp linkagg 3 actor system priority 100
-> lacp linkagg 3 no actor system priority
Release History
Release 6.1; command was introduced.
Related Commands
lacp linkagg size
show linkagg
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggActorSystemPriority
page 8-16
The number corresponding to the link aggregate group.
The priority of the switch's dynamic aggregate group in relation to other
aggregate groups. Possible values are 0–65535.
default
0
Creates a dynamic aggregate group.
Displays information about static and dynamic (LACP) aggregate
groups.
Link Aggregation Commands
OmniSwitch CLI Reference Guide
June 2012