Show Mvrp Last-Pdu-Origin - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show mvrp last-pdu-origin

Displays the source MAC address of the last MVRP message received on specific ports or aggregates.
show mvrp {port slot/port [– port2] | linkagg agg_num [-agg_num2]} last-pdu-origin
Syntax Definitions
slot/port
agg_num
Defaults
NA
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
None
Examples
-> show mvrp port 1/1-3 last-pdu-origin
Port Last PDU Origin
--------+-------------------
1/1 00:d0:95:ee:f4:64
1/2 00:d0:95:ee:f4:65
1/3 00:d0:95:ee:f4:66
->show mvrp port 1/21 last-pdu-origin
Port Last PDU Origin
--------+-------------------
1/1 00:d0:95:ee:f4:64
output definitions
Port
Last PDU origin
Release History
Release 6.4.3; command was introduced.
page 11-44
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The number corresponding to the aggregate group.
Displays the slot/port number.
The source MAC address of the last PDU message received on the
specific port.
OmniSwitch CLI Reference Guide
MVRP Commands
June 2012