Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 506

•
If the static aggregate has any attached ports you must delete them with the
command before you can delete it.
•
Use the lacp linkagg size command to create a dynamic aggregation (i.e., LACP) group. See
for more information about this command.
Examples
-> static linkagg 3 size 8
-> static linkagg 4 size 2 admin state disable
-> no static linkagg 3
Release History
Release 6.1; command was introduced.
Related Commands
show linkagg
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggSize
alclnkaggAggLacpType
alclnkaggAggName
alclnkaggAggAdminState
page 8-4
Displays information about static and dynamic (LACP) link aggregate
groups.
Link Aggregation Commands
static agg agg num
OmniSwitch CLI Reference Guide
page 8-9
June 2012