Show Spantree Map-Msti - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show spantree map-msti

Displays the Multiple Spanning Tree Instance (MSTI) that is associated to the specified VLAN.
show spantree mst vid vlan-map
Syntax Definitions
vid
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
This command is available when the switch is operating in either the 1x1 or flat Spanning Tree mode.
•
Initially all VLANs are associated with the flat mode CIST instance (also known as MSTI 0).
Examples
-> show spantree 200 map-msti
Vlan Msti/Cist(0)
------+--------------------------
200 0
Release History
Release 6.1; command introduced.
Related Commands
show spantree mst region
show spantree msti vlan-map
show spantree cist vlan-map
MIB Objects
vStpMstVlanAssignmentTable
vStpMstVlanAssignmentVlanNumber
vStpMstVlanAssignmentMstiNumber
page 7-174
An existing VLAN ID number (1–4094).
Displays the MST region information for the switch.
Displays the range of VLANs associated to the specified MSTI.
Displays the range of VLANs associated to the CIST instance.
Distributed Spanning Tree Commands
OmniSwitch CLI Reference Guide June 2012