Show Mvrp Timer - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show mvrp timer

Displays the timer values configured for all the ports or a specific port.
show mvrp {port slot/port [– port2] | linkagg agg_num [-agg_num2]} timer {join | leave | leaveall |
periodic-timer}
Syntax Definitions
slot/port
agg_num
join
leave
leaveall
periodic-timer
Defaults
NA
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the join, leave, leaveall, or periodic-timer parameter with this command to view the specific
timer values configured on all the ports.
•
Use the agg_num or slot/port parameter with this command to display the timer values configured for a
specific port.
Examples
-> show mvrp timer
Port Join Timer
(msec)
--------+--------------+--------------+---------------+----------------
1/1 600
1/2 600
1/3 600
1/4 600
-> show mvrp port 1/21 timer
Join Timer (msec)
Leave Timer (msec)
LeaveAll Timer (msec)
Periodic-Timer (sec)
-> show mvrp port 1/21 timer join
Join Timer (msec)
page 11-38
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The number corresponding to the aggregate group.
To display only the join timer.
To display only the leave timer.
To display only the leaveall timer.
To display only the periodic-timer.
Leave Timer LeaveAll Timer
(msec) (sec)
1800 30000
1800 30000
1800 30000
1800 30000
: 600,
: 1800,
: 30000,
: 1
: 600
Periodic Timer
(msec)
2
5
1
1
OmniSwitch CLI Reference Guide
MVRP Commands
June 2012