Step-By-Step Patch Installation; Step-By-Step Patch Installation Task List; Configuring The Patch File Location; Loading A Patch File - 3Com 4510G Configuration Manual

The patch matches the device type and software version.
The patch install command changes the patch file location specified with the patch location
command to the directory specified by the patch-location argument of the patch install command.

Step-by-Step Patch Installation

Step-by-Step Patch Installation Task List

Configuring the Patch File Location

Loading a Patch File

Activating Patches
Confirm Running Patches
Configuring the Patch File Location
Follow these steps to configure the patch file location:
To do...
Enter system view
Configure the patch file
location
The directory specified by the patch-location argument must exist on each member device. If one
member device does not have such directory, the system cannot locate the patch file on the
member device.
The patch install command changes patch file location specified with the patch location
command to the directory specified by the patch-location argument of the patch install command.
For example, if you execute the patch location xxx command and then the patch install yyy
command, the patch file location automatically changes from xxx to yyy.
Loading a Patch File
Loading the right patch files is the basis of other hotfixing operations. The system loads a patch file
from the flash by default. It will failed if the system cannot find the patch file on the flash.
Task
Use the command...
system-view
patch location patch-location
22-6
Remarks
Optional
Required
Required
Optional
Remarks
—
Optional
flash: by default