Network Services - Safran VersaSync User Manual

2.8.3

Network Services

Several standard network services can be enabled or disabled via the easily
accessible Network Services Panel under MANAGEMENT > Network Setup:
The Network Services panel has ON/OFF toggle switches for the following dae-
mons and features:
CHAPTER •
2 VersaSync User Manual Rev. 12
IPv4 Gateway: The gateway (default router) address is needed if com-
munication to the VersaSync is made outside of the local network. By
default, the gateway is disabled.
IPv6 Auto Configuration: Choose between Disabled (disable auto con-
figuration), Auto (stateless auto configuration using SLAAC and
DHCP), and Stateful (auto configuration using DHCP only).
Domain: This is the domain name to be associated with this port.
DNS Primary: This is the primary DNS address to be used for this port.
Depending on how your DHCP server is configured, this is set auto-
matically once DHCP is enabled. Alternatively, you may configure
your DHCP server to NOT use a DNS address. When DHCP is dis-
abled, DNS Primary is set manually, using the format "#.#.#.#" with no
leading zeroes or spaces, where each '#' is a decimal integer from the
range [0,255].
DNS Secondary: This is the secondary DNS address to be used for
this port. Depending on how your DHCP server is configured, this is
set automatically once DHCP is enabled, or your DHCP server may be
configured NOT to set a DNS address. When DHCP is disabled, DNS
Secondary is set manually, using the format "#.#.#.#" with no leading
zeroes or spaces, where each '#' is a decimal integer from the range
[0,255].
4. To apply your changes, click
System Time Message: A once-per second Time Message sent out via Mult-
icast; for details, see
Daytime Protocol,
daytime representation, often used for diagnostic purposes.
Time Protocol, RFC-868: This protocol is used to provide a machine-read-
able, site-independent date and time.
Telnet: Remote configuration
SSH + SFTP: Secure Shell cryptographic network protocol for secure data
communication and secure access to logs.
HTTP: Hypertext Transfer Protocol. Default = OFF.
Submit (the window will close), or Apply.
"System Time Message" on
RFC-867: A standard Internet service, featuring an ASCII
2.8 Configuring Network Settings
page 107.
75