Safran VersaSync User Manual page 270

4.4 Managing Users and Security
c. Click the
LDAP Advanced Settings
Under the LDAP Advanced tab, you can set the search filter and the LDAP login
attribute.
Fill in the following fields, as desired:
256
Membership Attribute— Enter the attribute of the above group that
will specify a user of that group. Example: member or memberUid.
Membership Value— Enter the value of the above attribute that will
be stored in the group. Acceptable values are username, uid, and dn.
Submit button.
Search filter—This is the LDAP search filter. Example: objectclass=user.
Login Attribute— This is the LDAP login attribute. Example: sAMAc-
countName.
NSS base—Enter the search base to be used for nss_base and nss_shadow.
Example: ou=People,dc=example,dc=com
NSS Scope:Enter the scope of the NSS search.
CHAPTER •
4 VersaSync User Manual Rev. 12