Safran VersaSync User Manual page 371

CR
LF
I
YY
^
DDD
HH
:
MM
SS
.
SSS
L
D
The leading edge of the first character (CR) marks the on-time point of the data
stream.
The time synchronization status character (I) is defined as described below:
? When the receiver is unable to track any satellites and the time synchronization lamp is
red.
* When the receiver time is derived from the battery backed clock or set manually through
the Setup Port Interface.
The leap second indicator (L) is defined as:
(Space) When a leap second correction is not scheduled for the end of the month.
L When a leap second correction is scheduled for the end of the month.
The Daylight Saving Time indicator (D) is defined as:
S During periods of Standard time for the selected DST schedule.
I During the 24-hour period preceding the change into DST.
D During periods of Daylight Saving Time for the selected DST schedule.
O During the 24-hour period preceding the change out of DST.
VersaSync User Manual
Carriage Return
Line Feed
Time Sync Status (space, ?, *)
Year without century (99, 00, 01, etc.)
Space separator
Day of Year (001-366)
Hours (00-23 UTC time)
Colon separator
Minutes (00-59)
Seconds (00-60)
Decimal Separator
Milliseconds (000-999)
Leap Second Indicator (space, L)
Daylight Saving Time Indicator (S,I,D,O)
APPENDIX
357