Safran VersaSync User Manual page 106

2.8 Configuring Network Settings
Deleting Host Keys
You can delete individual host keys. To delete a key:
1. Navigate to
2. Select
Creating Host Public/Private Key Pairs
You may create individual Host Public/Private Key pairs. Host keys must first be
deleted before new Host Keys can be created. To create a new set of host keys:
1. To access the SSH setup screen, navigate to
2. Should you want to change the key length of any host key, enter the
3. Check the
4. Click Submit.
5. Delete any of the keys you do not want. See
92
Note: Changing the values and submitting them in this manner
DOES NOT generate new host public/private key pairs. See
ing Host Public/Private Key Pairs" below
create new host public/private key pairs.
MANAGEMENT > NETWORK: SSH
open to the Host Keys
Delete in the field for the key you wish to delete, and click Submit.
SSH Setup. The window will open to the
desired length in the text field corresponding to the length you wish to
change.
Regenerate All Keys
The Key Type/Status/Action table will temporarily disappear while the Ver-
saSync regenerates the keys. The Host keys are generated in the back-
ground. Creating RSA and DSA keys, each with 1024 bits length, typically
takes about 30 seconds. Keys are created in the order of RSA, DSA,
ECDSA, ED25519. VersaSync will generate all 4 host keys, RSA, DSA,
ECDSA, and ED25519.
Note: If the unit is rebooted with host key creation in progress,
or the unit is booted and no host keys exist, the key generation
process is restarted. The key generation process uses the pre-
viously specified key sizes.
tab by default.
Host Keys
box.
CHAPTER
for information on how to
Setup. The window will
MANAGEMENT > NETWORK:
tab by default.
"Deleting Host Keys"
•
2 VersaSync User Manual Rev. 12
"Creat-
above.