Gps Tab: Events; System Tab: Events; Configuring Gps Notification Alarm Thresholds - Safran VersaSync User Manual

Hide thumbs Also See for VersaSync:
Table of Contents

Advertisement

4.3.2.2

GPS Tab: Events

Under the GPS Events tab, you can also configure Minor and Major
Alarm Thresholds for GNSS fault events; see
Alarm Thresholds"
4.3.2.3

System Tab: Events

4.3.3

Configuring GPS Notification Alarm Thresholds

VersaSync allows you to configure Minor and Major alarm thresholds for the
GNSS receiver. This is done by setting the minimum number of satellites the
receiver can track for a set time before an alarm is triggered. If both conditions
are met, i.e. the reception quality falls below the set number of satellites for the
set amount of time, an alarm is triggered.
CHAPTER
4
VersaSync User Manual Rev. 12
Too Few GPS Sat, Minor Alarm
Too Few GPS Sat, Minor, Cleared
Too Few GPS Sat, Major Alarm
Too Few GPS Sat, Major, Cleared
GPS Antenna Problem
GPS Antenna OK
GPS Receiver Fault
GPS Receiver Fault Cleared
below.
Minor Alarm Active
Minor Alarm Inactive
Major Alarm Active
Major Alarm Inactive
Unit Reboot
Timing System Software Error
Timing System Hardware Error
High Temperature, Minor Alarm
High Temperature, Minor, Cleared
High Temperature, Major Alarm
High Temperature, Major, Cleared
4.3  Notifications
"Configuring GPS Notification
237

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VersaSync and is the answer not in the manual?

Questions and answers

Table of Contents