Local Clock(S), Dst; Adding A Local Clock - Safran VersaSync User Manual

3.2 System Time
2. To access the
3. The
4. In the
5. In the
6. Click Submit.
To delete
3.2.4

Local Clock(s), DST

The Local Clock feature allows for maintaining one or several local times. These
times will reflect a time offset, thereby accounting for Time Zone, and DST (Day-
light Savings Time) correction.
3.2.4.1

Adding a Local Clock

To add a Local Clock:
1. Navigate to
2. Click the PLUS icon in the
3. The
4. Enter a
168
will be empty, unless:
a. A leap second is pending, and VersaSync has obtained this inform-
ation automatically from the GPS data stream.
b. A leap second had been configured previously by a user via the
Leap Second window.
Edit Leap Second
in the Leap Second Information
Edit Leap Second
Leap Second Offset
Date and Time
should occur.
a leap second correction, click the Delete button.
Note: The Delete button in the
be visible if a leap second has been set beforehand.
MANAGEMENT > OTHER: Time
screen.
Local Clock pop-up window will display.
Name for your local clock.
The name must be between 1 and 64 characters long; spaces are
allowed.
The name can be any meaningful name that helps you know your
point of reference (for example: "NewYork", "Paris" or "EasternHQ",
etc.).
information window, click the GEAR icon
panel.
window will display:
field enter the desired GPS Offset.
field, enter the date that the desired leap second
Edit Leap Second
Local Clocks panel in the
CHAPTER
window will only
Management.
Time Management
•
3 VersaSync User Manual Rev. 12
Edit