Safran VersaSync User Manual page 112

2.8 Configuring Network Settings
Restoring the Default SNMP Configuration
To restore the VersaSync to its default SNMP configuration:
1. Navigate to the
2. In the
98
phrases. Clicking on the "+" symbol in the top- right corner
opens the SNMP V3 Screen. See
SNMP Traps: This panel allows you to define different SNMP
Managers that SNMP traps can be sent to over the network.
This allows for SNMP Managers in different geographical areas
to receive the same SNMP traps that Managers in other areas
also receive. Clicking the PLUS icon in the top- right corner
opens the SNMP Traps Settings Screen. See also
on page 104
2. The Actions panel, which contains the
figuration button.
3. The SNMP Status
An SNMP ON/OFF switch.
An Authentication Error Trap
SysObjID—The System Object ID number. This is editable in the
SNMP Status panel (see
facing page).
Contact Information—The email to contact for service. This is
editable in the SNMP Status panel (see
Status" on the facing
Location— The system location. This is editable in the SNMP
Status panel (see
page).
Description—A simple product description. This is not editable
in the SNMP Status.
MANAGEMENT > NETWORK: SNMP Setup
Actions panel, click the
and "Setting Up SNMP Notifications" on
panel, which offers:
ON/OFF switch.
"Configuring the SNMP Status" on the
page).
"Configuring the SNMP Status" on the facing
Restore Default SNMP Configuration
CHAPTER
"SNMP V3" on page 102.
"SNMP Traps"
Restore Default SNMP Con-
"Configuring the SNMP
screen.
•
2 VersaSync User Manual Rev. 12
page 239.
button.