Safran VersaSync User Manual page 138

2.8 Configuring Network Settings
3. The
4. Enter the required information into the fields:
124
Note: Should the list be empty, no servers have been added
yet. In the event that added peers are not displayed, they
could not be resolved. Verify the IP address
To EDIT the settings of an NTP Peer, click the GEAR button next to it,
and proceed to Step 3 below.
To ADD a new NTP Peer, click the PLUS icon in the top right corner of
the NTP Peers panel.
To REMOVE an NTP Peer (and its associated configurations), click
the X-button next to it.
NTP Peers edit window opens:
Host: The IP address for the server to be used as host.
Min Poll Interval: Select a value from the drop down (the default is 3
(8s).
Max Poll Interval: Select a value from the drop down (the default is 3
(8s).
For both NTP Peers, and NTP Servers the Minimum and Maximum Poll
rate for NTP packets can be configured.
Enable Symmetric
metric Key. See also:
Key: Click the checkbox to enable/disable Sym-
"Configuring NTP Symmetric Keys" on
CHAPTER
page 131.
•
2 VersaSync User Manual Rev. 12