Resetting The Unit To Factory Configuration - Safran VersaSync User Manual

4.8

Resetting the Unit to Factory Configuration

In certain situations, it may be desired to reset all VersaSync configurations back
to the factory default configuration. The GNSS location, any VersaSync con-
figurations and the locally stored log files can be cleared via the Web UI.
If VersaSync was assigned a static IP address before cleaning the configurations,
it will be reset to DHCP after the clean has been performed. If no DHCP server is
available after the clean operation, the static IP address will need to be manually
reconfigured.
CHAPTER •
4 VersaSync User Manual Rev. 12
3. In the Actions panel, click
4. In the Apply License File
5. In the Upload File
navigate to the location mentioned under the first step, select the license
file, and monitor the installation progress in the
until the application has rebooted.
6. Refresh the browser window, and login to the Web UI again. Re-navigate to
Tools > Upgrade/Backup, and confirm that the newly installed Option is lis-
ted in the System Configuration
Note: Restoring configurations (reloading a saved configuration),
erasing the stored GNSS location and clearing the log files are sep-
arate processes. You may restore one without restoring the others.
4.8 Resetting the Unit to Factory Configuration
Apply License
window, click
window, click Choose
panel.
File.
Upload New File.
File. Using the Explorer window,
Status Upgrade window
293