Safran VersaSync User Manual page 361

CR
LF
I
^
DDD
HH
:
MM
SS
D
TZ
XX
The leading edge of the first character (CR) marks the on-time point of the data
stream.
The time synchronization status character (I) is defined as described below:
? When the receiver is unable to track any satellites and the time synchronization lamp is
red.
* When the receiver time is derived from the battery backed clock or set manually through
the Setup Port Interface.
The Daylight Saving Time indicator (D) is defined as:
S During periods of Standard time for the selected DST schedule.
I During the 24-hour period preceding the change into DST.
D During periods of Daylight Saving Time for the selected DST schedule.
O During the 24-hour period preceding the change out of DST.
E x a m p l e :
271 12:45:36 DTZ=08
The example data stream provides the following information:
Sync Status
VersaSync User Manual
Carriage Return
Line Feed
Time Sync Status (space, ?, *)
Space separator
Day of Year (001-366)
Hours (00-23)
Colon separator
Minutes (00-59)
Seconds (00- 60)
Daylight Saving Time indicator (S,I,D,O)
Time Zone
Time Zone offset (00-23)
Time synchronized to GNSS
APPENDIX
347