Safran VersaSync User Manual page 188

3.3 Managing References
To access the Reference Priority Setup screen:
1. Navigate to
OR:
1. On the
2. The
The Reference Priority screen is divided into 3 areas:
Adding an Entry to the Reference Status Table
To add a new entry to the Reference Status table:
174
MANAGEMENT > OTHER: Reference
HOME screen, click the GEAR icon in the
Configure Reference Priorities
a. The Actions panel, which provides a single action:
Restore Factory Defaults
b. The Configure Reference Priorities
VersaSync's references in a table form.
In this panel you can:
Add and configure new references
Delete references
Enable/disable references
Reorder the priority of VersaSync's references
c. The Reference Status
The Reference Status
status of the VersaSync's references. It is the same as the
ence Status
screen will display.
panel, which displays the priority of
panel
panel provides a real time indicator of the
panel on the HOME screen of the Web UI.
CHAPTER
Priority.
Reference Status panel:
•
3 VersaSync User Manual Rev. 12
Refer-