Manually Setting The Gnss Position - Safran VersaSync User Manual

3.3 Managing References
Sanitization
The Delete Position command is automatically applied when sanitizing a Ver-
saSync unit (ensuring that no trace of position data remains on the unit). See
"Sanitizing the Unit" on
Deleting the GNSS position
To delete the GNSS position:
1. Disconnect the GNSS antenna from the VersaSync unit (this is required
2. Navigate to
3. Click on the GEAR button next to the GNSS Reference (typically, there is
4. VersaSync will initiate a GNSS self survey.
3.3.3.9

Manually Setting the GNSS Position

210
page 300.
only when sanitizing
Interfaces > References: GNSS
only one reference, numbered "0"). The
Locate the Delete Position box, check it, and click Submit.
Note: In Mobile Receiver Mode
ition and start the GNSS survey. This feature is only available in
Standard Mode
a GNSS survey may take up to 24 hours.
Note: This topic applies only to stationary applications, i.e. to
ard mode, or Single Satellite
the unit).
GNSS 0
it is NOT possible to delete the pos-
and in Single Satellite
mode.
CHAPTER
Reference.
window will open:
Mode. In Single Satellite Mode
•
3 VersaSync User Manual Rev. 12
Stand-