Displaying Individual Logs - Safran VersaSync User Manual

4.6 Quality Management
The Logs Actions panel
The Actions panel on the upper-left corner of the Logs screen allows you to per-
form batch actions on your logs:
The Remote Log Server panel
The Remote Log Server panel, which is where you set up and manage logs on
one or more remote locations. See also:
page 289.
The Logs Settings panel
The Settings panel allows you you change log settings for your product. These
settings apply to all logs.
The Local Logging panel
The Local Logging panel will control the local logging (logs stored directly on the
unit) for each log individually.
4.6.2.3

Displaying Individual Logs

To access individual VersaSync logs:
286
Save and Download All
saSync.
Clear All Logs—Clear all the logs on VersaSync.
Persistence allows the unit to retain logs permanently.
When Persistence is ON [default] , your logs will be retained on the
disk and will always be available for troubleshooting and inform-
ational purposes.
When Persistence is OFF, logs will be overwritten over time by the
most recent information. Logs will also be removed upon reboot of
the unit.
This setting will increase the disk lifetime by reducing the amount of
permanently stored data.
Each log defaults to logging locally unless the user turns off the logging for
a particular log directly.
To turn off local logging, simply switch the toggle to OFF in the Local Log-
ging Panel. See "Types of Logs" on page 280
type.
Logs—Save and download all the logs on Ver-
"Setting up a Remote Log Server" on
CHAPTER
for information on each log
•
4 VersaSync User Manual Rev. 12