Safran VersaSync User Manual page 332

APPENDIX
resetpw
routes4
routes6
rt4add
rt4del
rt4get
rt6add
rt6del
rt6get
runtime
saveconf
savelog
scaleget
scaleset
sendnmeaudp
sendtrap
sendtrap all
services
servget
servset
slaacget
slaacset
stateset
status
swupgrade
syncstate
318
Command
Resets the administrator account (spadmin) password back to the
default value "
Displays the current IPv4 routing table(s)
Displays the current IPv6 routing table(s)
Adds an IPv4 static route
Deletes an IPv4 static route
Displays the configured IPv4 static routes
Adds an IPv6 static route
Deletes an IPv6 static route
Displays the configured IPv6 static routes
Displays the current runtime length
Generate archive of current configuration
Generate archive of all log files
Displays configured system timescale
Used to configure the system timescale
Used to configure, enable and disable the NMEA over UDP feature
"System Time Message" on page 107
(see
Triggers one type of a possible set of alarms.
Sends one instance of all alarms
Displays the state of services (enabled/disabled)
Displays the state of individual services
Enable or disable specific services
Displays whether SLAAC is enabled
Used to enable or disable SLAAC
Enable or disable an entry in the reference priority table. index = 0...15.
state = 0 (disable), 1 (enable)
Displays information about the oscillator disciplining
Performs system upgrade using the update bundle provided
Display timing system synchronization state
Description
admin123
"
for more information)
VersaSync User Manual