3.3.3.10 Gnss Constellations - Safran VersaSync User Manual

If a more exact altitude is desired, the use of a topographical map is recom-
mended. Applying the
ation.

3.3.3.10 GNSS Constellations

VersaSync allows you to select which GNSS constellations can be tracked. For
example, you can determine if you want GLONASS satellites to be tracked
(besides GPS).
Selecting GNSS Constellations
Your VersaSync is capable of tracking multiple GNSS constellations sim-
ultaneously.
To verify if satellite signals for the selected GNSS constellations are currently
received, see
page.
Configuring GNSS Constellations
To configure which GNSS constellations VersaSync's GNSS receiver shall track:
CHAPTER •
3 VersaSync User Manual Rev. 12
"Determining Which GNSS Satellites Are Received" on the next
1. Navigate to INTERFACES > REFERENCES: GNSS
2. Click the GEAR button next to
3. Under Selected Constellations, review which constellations are currently
tracked, and apply your changes. Note the following:
The u-blox M8T
stellations simultaneously; the table below shows which combinations
are possible:
WGS 84 standard will likely yield the most accurate elev-
GNSS 0. The
receiver is capable of receiving multiple GNSS con-
3.3 Managing References
Reference.
GNSS 0 window will open:
213