2.8.12.2 Configure A New Ptp Master Or Ptp Slave - Safran VersaSync User Manual

2.8 Configuring Network Settings
4.
2.8.12.2 Configure a New PTP Master or PTP Slave
To configure a PTP port:
1.
2.
3.
4.
5.
150
Select Download to obtain the PCAP file.
Note: The PTP TCP Dump panel will not display if you have removed
TCP Dump from your unit. See
more information about the main tcpdump feature.
Navigate to either the PTP Slaves Overview panel or the PTP Master Over-
view panel and select the plus icon.
Enter your PTP port configuration (some fields will hid or be revealed
based on your selections for Profile, Mode, and other factors). For more
information on your configuration options, see
Panel" on page 143.
Select Submit.
You will need to Enable the PTP port in the PTP Master or Slave Overview
panels.
View your PTP Master or Slave in the PTP Overview panels. For more
information on PTP verification, refer to the
page section.
"Network Services" on page 75
"The Edit PTP Settings
"PTP Monitoring" on the facing
CHAPTER •
2 VersaSync User Manual Rev. 12
for