Snmp V3 - Safran VersaSync User Manual

2.8 Configuring Network Settings
5. Click Submit. The created communities will appear in the
Editing and Deleting Communities
To edit or delete a community you have created:
1. Navigate to
2. Click the row of the
3. The
4. To
2.8.8.2

SNMP V3

SNMP V3 utilizes a user-based security model which, among other things, offer
enhanced security over SNMP V1 and V2.
Creating Users
1. Navigate to
2. In the
102
If no value is entered in the
system default address.
SNMP Community
length.
Permissions may be Read Only or Read/Write.
The Version field provides a choice of V1 or V2c.
panel:
MANAGEMENT > NETWORK: SNMP
SNMP V1/V2
wish to edit or delete. The cursor will change from an arrow icon to a point-
ing finger to indicate that the entry is clickable.
SNMP V1/V2c Settings for Access
Note: The options available for editing in the SNMP V1/V2c Set-
tings for Access window will vary contextually according to
the information in the entry chosen.
edit the settings, enter the new details you want to edit and click
Submit. OR: To delete
MANAGEMENT > NETWORK: SNMP
SNMP V3 panel, click the PLUS icon in the top-right corner.
IPv4 and/or
names should be between 4 and 32 characters in
panel that displays the community you
window will display.
the entry, click Delete.
CHAPTER
IPv6 field, VersaSync uses the
SNMP V1/V2
Setup.
Setup.
•
2 VersaSync User Manual Rev. 12