Safran VersaSync User Manual page 151

Factory default
restrict 127.0.0.1
restrict ::1
restrict default noquery nomodify
restrict -6 default noquery nomodify
keys /etc/ntp/keys/ntp.keys
controlkey 65533
requestkey 65534
trustedkey 65533 65534
server 127.127.45.0 prefer minpoll 4
server 127.127.22.0 minpoll 4
fudge 127.127.22.0 stratum 0
peer 10.10.128.35 minpoll 3 maxpoll 3 autokey
keysdir /etc/ntp/keys/
crypto pw admin123 randfile /dev/urandom
driftfile /etc/ntp/ntp.drift
logfile /home/spectracom/log/ntp.log
statsdir /home/spectracom/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable
Prior to Expert mode being enabled, the Network: NTP Setup page will contain
various tabs for configuring different options of the NTP Service. To prevent inad-
vertent changes from being made to a user-edited NTP.conf file via the web
pages, these NTP configuration tabs are removed from the web browser view as
long as the Expert mode remains enabled (only the Expert Mode tab is visible in
Expert Mode; all other tabs will no longer be present). Disabling the Expert mode
restores these tabs to the Edit NTP Services window.
To enable the Expert Mode, and edit the NTP.conf file:
CHAPTER •
2 VersaSync User Manual Rev. 12
NTP.conf
1. Navigate to MANAGEMENT > NETWORK: NTP
2. In the NTP Services
file:
panel locate the Expert Mode
2.8 Configuring Network Settings
Setup.
switch:
137