Safran VersaSync User Manual page 329

Command
clearcfg
clearlogs
clearstats
dateget
dateset
defcert
dhcp4get
dhcp4set
dhcp6get
dhcp6set
dns4cfg
dns4get
dns4set
doyget
doyset
gettemp
gpsdop
gpsdserviceportget
gpsdserviceportset
gpsinfo
gpsloc
gpsmdl
gpsreset
gpssat
gw4cfg
gw4get
gw4set
VersaSync User Manual
Restores configuration to factory defaults and reboots
Clears all logs
Clears all statistical data (NTP, and oscillator/disciplining)
Displays current date (for example, 15 APR 2015)
Used to set the current date
Used to create a new Safran self-signed SSL certificate for HTTPS in
case of expiration of the original certificate
Displays whether DHCP is enabled
Used to enable or disable DHCP
Displays whether DHCPv6 is enabled
Used to enable or disable DHCPv6
Display the configured IPv4 primary and secondary DNS addresses
Displays the configured DNS servers
Used to configure the DNS servers
Used to obtain the current Day of Year
Used to set the current Day of Year
Displays the temperature of the oscillator, board, or CPU
Displays GNSS receiver positional accuracy estimates
Displays the GPSD service port
Sets the GPSD service port
Applicable to SAASM-equipped VersaSync units only
Displays GNSS latitude, longitude and antenna height
Displays the GNSS Manufacturer and Model
Resets the GNSS Position stored in the unit.
Displays GNSS satellites tracked and maximum signal strength being
received
Display the configured IPv4 gateway
Displays the default IPv4 gateway
Used to configure the IPv4 gateway addresses
Description
APPENDIX
315