Safran VersaSync User Manual page 113

Configuring the SNMP Status
The SNMP Status Settings are sysObjectID, sysContact, and sysLocation. To con-
figure SNMP Status Settings:
CHAPTER •
2 VersaSync User Manual Rev. 12
3. Confirm that you want to restore the default settings in the pop-up mes-
sage.
1. Navigate to MANAGEMENT > NETWORK: SNMP
2. In the SNMP Status
corner of the panel.
3. The SNMP Status
The following settings can be configured in this window:
In the sysObjectID
In the sysContact
contact you wish to use.
In the sysLocation
unit.
panel on the left, click the GEAR icon in the top-right
pop-up window will display:
field, enter the SNMP system object ID.
field, enter the e-mail information for the system
field, enter the system location of your VersaSync
2.8 Configuring Network Settings
Setup.
99