Safran VersaSync User Manual page 266

4.4 Managing Users and Security
4. Click the LDAP Servers button to add a server and identify the primary
5. There will be 4 tabs to allow additional LDAP configuration:
LDAP Servers Settings
Under the LDAP Servers popup window, you manage the LDAP server(s) to be
accessed:. It is necessary to add a server before other settings are configured.
Under the LDAP Servers tab, the window displays:
252
server.
Settings: This is where you set up the general LDAP Distinguished
Name and Bind settings.
Security: This is where you upload and manage the CA server cer-
tificate, CA client certificate and CA client key.
Group: This is where you enable/disable group-based authentication.
Advanced: This is where you set up your search filter(s) and login
attribute.
LDAP Server Status—Attempts to ping the server and will display one of
the following states:
DISABLED (yellow) —The Enabled checkbox under the Settings tab
as not been selected.
REACHABLE (green)—The server is reachable.
UNREACHABLE
Test LDAP Configs button -Performs an ldapsearch command with the con-
figured servers and settings. (Note: does not test TLS Certificates).
UNKNOWN (yellow) —The LDAP Config test has not been performed
yet.
LDAP CONFIGURATION VALID
successfully authenticated with the server.
SERVER CANNOT BE REACHED
reached.
(red)—The server is unreachable.
(green)—The ldapsearch command
(red)—The server cannot be
CHAPTER •
4 VersaSync User Manual Rev. 12