Configuration Options; Overview; Option Sets - Paradyne COMSPHERE 3610 Operator's Manual

4

Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Option Sets

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the DCP to Set Configuration Options
Editing Configuration Values
Saving Configuration Options
Configuration Options Tables
DSU Configuration Options
Diagnostic Configuration Options
DBM Configuration Options
General Configuration Options
Backup Configuration Options
MUX Configuration Options
Port Speed Configuration Options
LPDA-2 Configuration Options
Keys to Using Configuration Option Tables
Overview
After the DSU and options are installed and any
necessary hardware switches or jumpers have been set, the
software configuration options must be set. Configuration
options are set via the Model 3610 DSU's diagnostic
control panel (DCP) or async terminal, or the Model 3611
DSU's shared diagnostic control panel (SDCP), by
accessing the Configuration (Confg) branch of the menu.
This chapter focuses on the Configuration Option
(Opts) subbranch, describes how to edit configuration
options and save changes, and provides Configuration
Option Tables that describe each configuration option in
an option set and its selections.
Option Sets
There are eight configuration option areas (or option
sets) within the DSU:
The active area (Activ) contains the DSU
configuration options currently being used.
The remote area (Remt) allows a selected DSU's
configuration options to be retrieved so they can be
displayed, edited, and/or saved back to the selected
DSU, another DSU, or the local DSU. The remote
3610-A2-GB91-90

Configuration Options

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
July 1999
configuration option sets that can be retrieved are
Activ, Usr1, Usr2, and Usr3.
The user 1 area (Usr1) is a customer-defined set of
stored configuration options. By having these
predetermined option sets stored, they can be
loaded rapidly as operating requirements change.
The user 2 area (Usr2) is functionally the same as
Usr1, providing further flexibility when creating
configurations for various applications.
The user 3 area (Usr3) is another customer-defined
option set; however, it comes factory-loaded with
the configuration option set for a DBM-V, DBM-S,
or DBM-D (carrier-mounted DBMs only).
CAUTION
Since this area can be
overwritten, care should be
taken to not save to this area if
you have a DBM-V, DBM-S, or
DBM-D as part of your
configuration.
6
6-1
6-1
6-2
6-3
6-4
6-5
6-5
6-5
6-5
6-5
6-5
6-5
6-6
6-6
6-6
6-1