Sdcp And Model 3611 Dsu Faceplate; Status Indicators - Paradyne COMSPHERE 3610 Operator's Manual

SDU 1
SELECT
KEY
NETWORK
DEVICE
ALARM

Status Indicators

The status indicators on the DCP of the Model 3610
DSU and on the faceplate of the Model 3611 DSU
continuously provide information on the current operating
condition of the DSU. All of the status indicators on the
Model 3610 DSU appear on its DCP
The status indicators for the carrier-mounted
Model 3611 DSU are located on the SDCP and the
individual circuit card faceplates
indicator is not used with this product. Status indicators
are listed and described in Table
3610-A2-GB91-90
CARRIER SLOTS 1–16
2 3 4 5 6 7
Select
OK Alarm BckUp Test EC
STATUS
INDICATORS
OK Alarm BckUp Test EC
ERROR
CORRECTION
DIAL
TEST
BACKUP
MODE
Figure 4-2. SDCP and Model 3611 DSU Faceplate
(Figure 4-1).
(Figure 4-2). The EC
4-1.
8 9 10 11 12 13
F1 F2 F3
KEYPAD
Status
OK
Alrm
Test
Dial
103 TXD
104 RXD
105 RTS
106 CTS
107 DSR
108 DTR
109
LSD
Front Panel
Multirate
DSU
3611
For the carrier-mounted DSU, the shared diagnostic
unit (SDU) status indicators provide additional
information on the current operating condition of the
diagnostic interfaces to the DSUs. Refer to the
COMSPHERE 3000 Series Carrier, Installation Manual
for a description of the SDCP and SDU status indicators.
July 1999
DSU Operations
14 15 16
COMSPHERE 3000
LCD DISPLAY
NETWORK/
DEVICE ALARM
TEST MODE
DIAL BACKUP
DTE
STATUS
INDICATORS
SDCP
INDICATOR
496-12964a-02
4-3