Saving Configuration Options - Paradyne Hotwire 8775 User Manual

Saving Configuration Options

When changes are made to the configuration options through the Configuration
Edit/Display menu, the changes must be saved to take effect. Use the Save
function key to go to the Save Configuration screen.
Procedure
To save configuration option changes:
If the Telnet Session configuration option is changed, a message displays on the
Save Configuration screen warning that an answer of Yes will cause the Telnet
session to disconnect. Do not answer Yes unless you are prepared to disconnect.
If the DSL Mode configuration option is changed, a message displays on the Save
Configuration screen warning that an answer of Yes will cause the system to reset.
Do not answer Yes unless you are prepared to reset the unit.
8700-A2-GB25-10
main/config/saveprompt
Slot: 4
An answer of "yes" will cause the system
to reset as if it had been powered off and on!
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Command Complete
1. Press Ctrl-a to switch to the function keys area below the dotted line.
2. Select Save and press Enter.
NOTE:
When Exit is selected before Save, or Save has been selected from any
Configuration/Edit menu, a Save Configuration screen appears that requires
a Yes or No response. If you select:
— Yes, the configuration is saved.
— No, the Main Menu reappears and changes are not saved.
February 2001
3. Initial Startup and Configuration
SAVE CONFIGURATION
Save Changes? No
WARNING:
Hotwire
Model: 87x5
MainMenu Exit
3-7