Dataphone Ii Nms Options - Paradyne COMSPHERE 3610 Operator's Manual

DATAPHONE II NMS Options

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
Table I-1 identifies the positions on the DSU/ DBM
option matrix displayed at the network management
console by the DATAPHONE II System Controller,
Network Controller, and Diagnostic Console. The
following tables, I-2 through I-10, identify the options
represented on each line of the matrix. (The 3600 Series
DSU does not use the J and K lines.)
list all valid options on the matrix for the DSU and the
DBM, respectively.
3610-A2-GB91-90
Tables I-11 and I-12
DATAPHONE II Options Matrix
A1 A2 A3
B1 B2 B3
C1 C2 C3
D1 D2 D3
E1 E2 E3
F1 F2 F3
G1 G2 G3
H1 H2 H3
I1 I2 I3
J1 J2 J3
K1 K2 K3
For options that have a range of possible values,
such as Rate, each position represents one value.
These values are mutually exclusive, that is, only
one matrix position can be turned on.
and I-12 identify mutually exclusive option values.
For options with only two possible values, such as
options that are either enabled or disabled,
Tables I-2 through
represented by the matrix position when it is turned
on, then show the value represented by the position
when it is turned off (in parentheses).
Table I-1
A4 A5 A6
B4 B5 B6
C4 C5 C6
D4 D5 D6
E4 E5 E6
F4 F5 F6
G4 G5 G6
H4 H5 H6
I4 I5 I6
J4 J5 J6
K4 K5 K6
July 1999
I-1
Tables I-11
I-10 first list the value
A7 A8
B7 B8
C7 C8
D7 D8
E7 E8
F7 F8
G7 G8
H7 H8
I7 I8
J7 J8
K7 K8
I
I-1