Paradyne COMSPHERE 3610 Operator's Manual page 249

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
Pin assignments for the 3600 Series DSU connectors
and interfaces are included here. Refer to them as needed.
Figure F-1 shows the Model 3610 DSU's digital
network connector, which is used for DDS as well as
4-wire Switched 56 DBM connection;
its pin assignments. Table F-2
connector pin assignments used for the V.32 DBM and
2-wire Switched 56 DBMs, which uses a 6-pin jack. The
6-pin jack is not shown in any figure.
Figure F-2 shows the 3600 Hubbing Device, while
Table F-3 shows its pin assignments.
provide the 3600 Hubbing Device jack connector pin
assignments.
3610-A2-GB91-90
Pin Assignments
Table F-1 provides
provides the network
Tables F-4 and F-5
July 1999
Figure F-3 shows the Modular DSU rear connector
plate, while Table F-6 provides the EIA-232-D/V.24
connector's pin assignments.
Modular DSU V.35 adapter plug that is shipped with the
rear connector plate, and and
adapter cable; Table F-7 provides the Modular DSU's
25-pin V.35 connector and the V.35 adapters' pin
assignments.
Figure F-6 shows the NMS adapter cable and
provides its pin assignments.
CC-to-DB25 cable used to connect an async terminal.
Figure F-8 shows the EIA-232-D crossover cable and its
pin assignments, and Figure F-9
cable and its pin assignments.
Refer to the COMSPHERE 3000 Series Carrier,
Installation Manual or the Applications Guides for
additional pin assignments. (The Applications Guides can
be ordered. Refer to Appendix
F
F-1
Figure F-4 shows the
Figure F-5 shows the V.35
Table F-8
Figure F-7 shows the SDU
shows the V.35 crossover
L.)
F-1