Paradyne COMSPHERE 3610 Operator's Manual page 45

Specifications
DTE INTERFACE
Non-modular DSU
25-pin D-subminiature connector
34-pin connector
Modular DSU with 25-Pin V.35 Interface
Uses a Rear Connector Plate with two
25-pin D-subminiature connectors.
ENVIRONMENT
Operating Temperature
Storage Temperature
Relative Humidity
Shock and Vibration
HEAT DISSIPATION (MAX.) AT 115 VAC
3610 DSU
3610 DSU with DBM
3610 DSU with TDM/Flex
2-port version
6-port version
3610 DSU with MCMP/Flex
2-port version
6-port version
3611 DSU
3611 DSU with DBM, DBM-V, DBM-S, or
DBM-D
3611 DSU with TDM
3611 DSU with MCMP
3610-A2-GB91-90
Table 1-8
(2 of 4)
General 3600 Series Technical Specifications
EIA-232-D/ITU-T V.24 (ISO 2110)
ITU-T V.35 (ISO 2593)
EIA-232-D/ITU-T V.24 (ISO 2110)
ITU-T V.35 (ISO 2593)
(A modular DSU V.35 adapter is required to use the V.35
connector. The adapter provides an interface between the
DSU's 25-pin D-type connector and the DTE cable's V.35
connector.)
32 to 122 F (0 to 50 C)
– 4 to 158 F (–20 to 70 C)
5%— 95% (noncondensing)
Withstands normal shipping and handling
22.2 Btu/hr
29.0 Btu/hr
29.3 Btu/hr
42.3 Btu/hr
30.3 Btu/hr
43.6 Btu/hr
22.2 Btu/hr
27.3 Btu/hr
29.4 Btu/hr
31.1 Btu/hr
July 1999
Criteria
Introduction
1-29