Saving And Changing Configuration Options - Paradyne COMSPHERE
3610 Quick Reference Manual

Saving and Changing Configuration Options

For Model 3610 and Model 3611 DSUs, change configurations options from:
H
A front panel, or
H
A 6700 or 6800 Series NMS, or
H
An async terminal (Model 3610 standalone only)
Configuration options supporting TDM, MCMP, and digital bridging are in Document
No. 3610-A2-GB48. Configuration options supporting DBMs are in Document
No. 3610-A2-GB49.
The DSU preconfigured at the factory for FacT with default settings for a tributary,
point-to-point circuit, and a data rate of Auto. Set the data rate to match the service
provider's rate.
If you have a point-to-point configuration, enable one unit as the control and the other
unit as the tributary.
1. From the Home screen select Local (F1). The following screen appears on the
LCD.
Local Mode:
Stat
F1
Confg Ctrl
2. To access the Configuration (Confg) branch, press the
appears. Press the function key below Confg. The following screen appears.
Configure:
Opts
F1
Phone Addr ChgMd Term
Menu
Bckup Test
F3
F2
PList Dir
F2 F3
SPID
19
key until Confg