C-7 Multipoint Backup Progress Messages - Paradyne COMSPHERE 3610 Operator's Manual

COMSPHERE 3600 Series Data Service Units
DCP Message
AggSw Active
AggSw Inact
AggSw w/DDS
AggSw w/o DDS
Brdg with DDS
Brdg w/o DDS
Inactiv Brdg
C-10
Table C-7
Multipoint Backup Progress Messages
Aggregate switching is active.
Aggregate switching is not active.
Aggregate switch in partial backup — Clock source is determined by the DSU
TxClkSource configuration option.
Aggregate switch in full backup — Clock source is determined by the AgSw
Timing configuration option.
Multipoint circuit in partial backup — Clock source is determined by the
TxClkSource configuration option.
Multipoint circuit in full backup — Clock source is determined by the Brdg
Timing configuration option.
Digital bridge is not active.
July 1999
Condition
3610-A2-GB91-90