Configuration Branch; Options; Configuration Branch Menu Selections - Paradyne COMSPHERE 3610 Operator's Manual

Configuration Branch

The Configuration (Confg) branch allows you to
configure or customize the DSU and its options to fit site
requirements, to enter and change telephone numbers if a
DBM is installed, and to specify the protocol used by a
connected NMS.
The Configuration branch menu varies with the options
being configured. Table 4-9 lists the selections on the
Configuration branch menu.
Table 4-9

Configuration Branch Menu Selections

Menu Configuration Parameters
Selections
Opts Configuration options
1, 2
PList Poll list commands
3
Dir Telephone directory entries
Phone Local telephone number
1
Addr Network address
ChgMd NMS protocol mode
1
Local mode only.
2
Not supported in DMC protocol.
3
Available only if a DBM is installed.

Options

The Options (Opts) submenu allows you to save, copy,
and/or change configuration options.
To access the Options submenu from the top-level
menu, make the following selections:
Local (F1), or Remot (F2) and Address
Confg
Opts
3610-A2-GB91-90
Requested
July 1999
DSU Operations
4-29