Paradyne COMSPHERE 3610 Operator's Manual page 139

2nd Ch(bps): 400
Next 100 400
In-band Secondary Channel Diagnostic Transport Speed (in bps) . Determines the DSU's port speed when
NonD (nondisruptive diagnostics) is selected and there is no excess bandwidth available for in-band
secondary channel transport operation. (This configuration option only appears when DiagType = NonD.)
The selection entered here allocates DSU port bandwidth to the in-band secondary channel transport. For
example, the DSU port speed and the DDS line speed are 9.6 kbps, and the Diagnostic Type entered is
NonD and the In-band Secondary Channel Diagnostic Transport Speed entered is 400. The resulting DSU
port speed is 9.2 kbps. (Refer to the following list for valid diagnostic speeds.)
NOTE: When the TDM is operating at a line speed greater than 19.2 kbps or with a multipoint configuration,
100 bps is not a valid in-band secondary channel transport rate.
If the DSU Rate(Kbps) is equal to Port
Speed, or if the underspeed port speed
and sum of the TDM ports is equal to
the aggregate speed on the DSU:
1.2
2.0
2.4
4.0
4.8
7.2
8.4
9.6
12.0
14.4
16.8
18.0
19.2
28.8
32
38.4
48
56
64
3610-A2-GB91-90
Table 6-2
(2 of 3)
Diagnostic DSU Configuration Options
800 1200 1600
Valid diagnostic speeds are:
100, 400
100, 400
100, 400, 800
100, 400, 800
100, 400, 800, 1200, 1600
100, 400, 800, 1200
100, 400, 1600
100, 400, 800, 1200, 1600
100, 400, 800, 1200
100, 400, 800, 1200, 1600
100, 400, 800, 1200
100, 400, 1200
100, 400, 800, 1200, 1600
100, 400, 800
100, 400, 800, 1600
100, 400, 800, 1200, 1600
100, 400, 800, 1200, 1600
100, 400, 800, 1600
100, 400, 800, 1600
July 1999
Prev
Configuration Options
6-11