Configuration Options - Paradyne 7510 DSU Start-Up Instructions

Configuration Options

6
The following tables list the configuration options of the Model 7510 DSU.
System
Configuration Option
Operating Mode
DDS Line Rate (Kbps)
LADS Timing
LADS Line Rate (Kbps)
Test Timeout
Test Duration (min)
Network Interface
Configuration Option
Network-initiated DSU Loopback (64K CC)
Data Scrambling (64K CC)
V.54 Initiated DSU Loopback
Data Port
Configuration Option
Invert Transmit Clock
Port (DTE) Initiated Loopbacks
Bilateral Loopback
Carrier Control by RTS
CTS Control
RLSD Control
DSR Control
Monitor DTR
Terminal Port
Configuration Option
Monitor DTR
Inactivity Timeout
Disconnect Time(minutes)
January 1999
Settings
[DDS], LADS
56, 64CC, [Autobaud]
[Internal], External, Receive
56, [64]
[Enable], Disable
1–120, [10]
Settings
[Enable], Disable
Enable, [Disable]
Enable, [Disable]
Settings
Enable, [Disable]
[Disable], Local, Remote, Both
Enable, [Disable]
[Constant], Switched
[Standard], Follow RTS, Forced On,
Circuit Assurance
[Standard], Forced On
[Standard], Forced On, On During Test
[Enable], Disable
Settings
[Enable], Disable
Enable, [Disable]
range 1 – 60 [5]
7510-A2-GN10-30
Default in [Bold]
Default in [Bold]
Default in [Bold]
Default in [Bold]