C-6 Subnetwork Health And Status Messages - Paradyne COMSPHERE 3610 Operator's Manual

Message
Devic
DialBU
DialCN
DialTn
Disab
DTR
ExtLd
Facil
MAJOR
MUX
NoResp
Normal
RPower
Stndby
Stream
SubSpd
Test
Thresh
TribTm
Trunc
3610-A2-GB91-90
Table C-6
Subnetwork Health and Status Messages
Device Failure. One of the following major alarms is in effect:
Configuration Corrupt
Device Test Failure
MUX Device Failure
Dial Mode. Indicates DBM is active.
Dial Connect. Indicates DBM is in Standby mode.
Dial Tone Test failure.
Indicates DSU, DBM, or Port nn is disabled.
DTE alarm. Data Terminal Ready lead is Off.
External lead alarm a or b.
DDS facility alarm. Indicates a network facility alarm.
Indicates a major alarm from a DATAPHONE II device.
MUX (TDM or MCMP) failure.
The active poll list member did not respond. Probable cause: facility problem,
remote DSU problem, or poll list incorrect.
Active poll list member reports no alarm or status.
Redundant power supply alarm.
Dial standby.
Streaming terminal.
Subnormal operating speed.
Test mode. DSU test, DBM test, or Port nn test.
Threshold exceeded.
Tributary time-out.
Subtree truncation.
July 1999
Diagnostic Control Panel Messages Reference
Condition
C-9